Wood grips for RADOM P-64 pistols

---

Thumb magazine-release grips for RADOM P-64 pistols.

All grip models can be made with the thumb operated magazine-release option.
Comes with a screw set and the heat treated metal piece.
Price depends on model selection and it is displayed in the Model selection cell.
Mounting instructions can be found here.
Notes.
°Short grips are flushed with the frame while magazine-extended grips cover the floor plate of the magazine.
°RH means Right-handed, LH means Left-handed.
°In model selections, right-handed thumb rest means the thumb rest is on the left hand side.
°You can check all available models on this page below.

Please select model and other options for your grips.

Model
$97 Regular $100 Thumb rest, RH $100 Thumb rest, LH $100 Ambidextrous finger grips $100 Thumb rest & finger cuts, RH $100 Thumb rest & finger cuts, LH $100 Beaver tail extended $100 Beaver tail w/thumb rest, RH $100 Beaver tail w/thumb rest, LH $100 Beaver tail w/ambidextrous finger cuts $100 Beaver tail, thumb rest & finger cuts, RH $100 Beaver tail, thumb rest & finger cuts, LH
Grip length
Magazine-extended Short
Thumb release side
Right-handed operation Left-handed operation
Wood selection Walnut Wattle Ash Maple
Finish option Clear Oil Red DeepRed Gray Black
Texture option Checkered Smooth Stippled

---

Regular grips

Available in short or magazine-extended variation.

The short grips are flushed with the frame while the magazine-extended model covers the floor plate of the magazine.

2 splits checkering.
4 splits checkering.
Short model with 4 splits checkering.
Short model with 2 splits checkering.
RADOM P-64 grips.
Comes with a screw set.

Grip length	Short Magazine-extended
Wood	Walnut Wattle Ash Maple Alder
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	2 splits checkered 4 splits checkered Smooth

---

Thumb rest grips

Available in right or left handed configuration.
For left-handed use.
RADOM P-64 thumb rest grips.
Comes with a screw set.

Side	Right handed Left handed
Grip length	Short Magazine-extended
Wood	Walnut Wattle Ash Maple Alder
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

---

Finger grips with or without thumb rest

Available in right / left handed or ambidextrous configuration.
RADOM P-64 finger grips w/wo thumb rest.
Comes with a screw set.

Side	Right handed Left handed Ambidextrous
Grip length	Short Magazine-extended
Wood	Walnut Wattle Ash Maple Alder
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

---

Grips with beaver tail extension

RADOM P-64 beaver tail grips.
Comes with a screw set.

Grip length	Short Magazine-extended
Wood	Walnut Wattle Ash Maple Alder
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

---

Thumb rest grips with beaver tail extension

Available in right or left handed configuration.
Short model.
RADOM P-64 thumb rest grips with beaver tail extension.
Comes with a screw set.

Side	Right handed Left handed
Grip length	Short Magazine-extended
Wood	Walnut Wattle Ash Maple Alder
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

---

Finger grips w/wo thumb rest. Beaver tail extended model

Available in right / left handed or ambidextrous configuration.
Ambidextrous finger grips. Short model.
RADOM P-64 finger grips w/wo thumb rest. Beaver tail model.
Comes with a screw set.

Side	Right handed Left handed Ambidextrous
Grip length	Short Magazine-extended
Wood	Walnut Wattle Ash Maple Alder
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

---

Mounting instructions for thumb magazine-release grips.

Remove the magazine and check if the gun is unloaded.

It is a good advice to install the grips without the lever just to get the feel.
Do not force the grips otherwise the front lip may break off making the grips unusable!

If you are unsure how to make it please ask for a professional's help.

The grips come with a lever precisely fitted to the grips.
It can rock back and forth. The front position is where the magazine will be released.
To mount the grips the lever must be rotated to its rear position. Put on the left side grip with the lever attached.
Align the lever to grab the recess on the magazine-release arm.
You may have to pull back the magazine release arm to let the grip sit flush the frame.
Be careful! Don't pinch your fingers!
Push the grip to its final position. Mount the other side and install the screw. Check gun functionality. Try out if the magazine inserts and drops fine.
Please be careful when operating the original magazine release by hand!
The lever is made of metal and may hurt your hand.

Your feedback on these grips is appreciated. Thank you in advance!

---

Thank you so much for your interest and support.

MARSCHALGRIPS.COM & MARSCHALGRIPS.NET Ⓒ 2007-2025 Marschalko Gusztav, Denes